TPMS EZ-pad User Manual Version 1.0
Congratulations! You are a user of the TPMS EZ-Pad. This awesome device is brought
to you enabling an easy way to diagnosis and program EZ-Sensors.
As you can see, your TPMS EZ-Pad has no screen. How you suppose to control it?
You will control your device using a Desktop application, installed in your computer,
or using a smartphone, through the TPMS EuroShop application. The smartphone must
run Android and have Bluetooth capability.
To download both applications, please, access:
www.tpmseuroshop.com or use your mobile device on the QR-Code below:
- Internet Connection: Your TPMS EZ-Pad
will controlled using the internet. This guarantee that you will have the most up
to date information and features. The power of the worldwide network helping your
- Intended Use: The TPMS EZ-Pad is intended
to be a diagnosis tool for all TPMS OE sensors and for the EZ-Sensor, as well as
a programming tool for the EZ-Sensor. It can be used as a pad at the top of your
desk or on your hand, as an extension of your mobile smartphone.
The intended use
of this device is described by this manual. Any operation not included in this manual
can damage the tool or lead to accidents. Such uses will also void the user’s guarantee
and warranty claims.
- For Your Safety: Read this operating
manual before using the device for the first time and act accordingly. Refer to
this manual in case of doubts.
This manual can be accessed online at
- Registration: In order to effectively
use the TPMS EZ-Pad the user must be registered at the TPMS EuroShop.
Please, go to www.tpmseuroshop.com and
complete your registration. If you are already a user, just use your login credentials
to start using it.
On this section will help you identify the different features of your TPMS EZ-Pad.
The picture below reflect the top part of the Pad.
The TPMS EZ-Pad
has two buttons, two LEDs and two activation spots. The explanation
of each of those are in the following chapters:
Attention, the button
perform Diagnosis only, not Programming.
Power Button: The main function of the Power Button is to control whether your
TPMS EZ-Pad is ON or OFF. When ON, pressing and holding this button for more than
2 seconds, cause the device to go OFF.
When OFF, pressing it will power-up your
Trigger Button: The Trigger Button is used to repeat the last operation (if
it was a Sensor Diagnosis) using the same parameters defined with the application.
If the user selected the correct MMY and performed one Diagnosis, it can repeat
this process by pressing this button.
- Leds: There are two LEDs in your programming
tool. Each one will display specific information, as below:
Power LED The Power LED indicates primarily if the tool is ON.
The states of this LED are explained below:
- Solid Red – Charging
- Solid Green – Charged (Battery
- Flashing Red – Battery almost
- Flashing Green – Battery OK.
Status LED The Status LED indicates whether the Diagnosis or Programming
are in process, failed or succeeded. It also shows the Bluetooth connection status.
- Solid Red – Diagnosis or Programming
- Solid Green – Diagnosis or Programming
- Flashing Green – Diagnosis or
Programming under Progress
- RF Positioning: Your TPMS EZ-Pad is meant to be used on your desk. Sitting on the table, you can put the sensor on top of it, right on the mark below:
Proceed with the diagnosis/programming now. See the picture below for a better illustration:
You can also put the sensor right in front of the TPMS EZ-Pad and activate the sensors in front of it.
At this way, align the valve on the wheel with the RF mark shown below. This is the way the RF field will be emitted by the TPMS EZ-Pad, therefore, the sensor and the valve must be in this direction.
For a better understanding, take a look at the picture below:
On this section, a list of "How to" will guide you through the main questions you
may have, before using your new TPMS EZ-Pad.
- Download the App: If you intend to
use your TPMS EZ-Pad with a desktop computer, please, access
and download the Desktop Application. You will need internet connection also to
run the software.
If you intend to use your TPMS EZ-Pad with a smartphone, please,
access the Google Play Store® and download the TPMS EuroShop app.
- Charge your Device: To charge your
device just plug it to a USB port in any computer. The LEDs will indicate the charging
status. Please, refer to section 2.2 to see how to understand the LED states.
battery inside the tool is not replaceable.
- Program and Diagnose Sensors: To control
your TPMS EZ-Pad you will need an external application, such as a computer or a
smartphone. See the "Download the App" section. If you already downloaded this application,
check if the sensor is in the right spot. Please, check the "RF Positioning" section.
After that, follow the instructions under the Application Manual to perform the
operation. You will have to select the correct Vehicle Model and Year of Manufacturing
to be able to correctly program and diagnose the sensors.
- Electrical Characteristics: You should receive
your TPMS EZ-Pad charged. After using it, to charge your device, just plug it to
the computer, using the USB cable provided together with the tool.
to the LED section, where the explanation on how to identify if the device battery
is low, full or being charged.
do not recommend the usage with the tool with any other cable different from the
The device can be used while being charged.
also do not recommend using any other USB charger, different from the standard computer
- Mechanical Characteristics: Please,
check the mechanical characteristics in the table below:
- USB Interface: Your TPMS EZ-Pad come
with a USB connector that can be used for charging or controlling the tool. Most
computers have a USB interface.
The USB interface follow an international standard
and complain with the USB 1.1 specification.
To check if your computer is compatible
with this device, please, refer to its own manual.
The USB connector is intended
to be used only on computers. This shall not be connected to smartphones, tablets,
etc. To control your device using one of these devices, please, go to the Bluetooth
- Bluetooth: Additionally to the USB
connector, you can control your TPMS EZ-Pad using Bluetooth connection. With this,
you can control your tool using a smartphone or tabled, using Android devices only.
The Bluetooth interface follow the international standard. The device operates at
Bluetooth Class 1.5 and it was approved by the competent agencies. The PIN used
to pair your device with the TPMS EZ-Pad is "0000".
NOTES ON ENVIRONMENT
In accordance with European Directive 2002/96/EC, electric tools, which can no longer
be used, must be collected separately and recycled in an environmentally friendly
In accordance with Directive 2006/66/EC, defective or old batteries must
be recycled in an environmentally friendly manner.
The TPMS EZ-Pad must be handled with care. It was designed for use in a workshop,
but it is an electronic device and must be handled like one.
The warranty is offered
in accordance with the national regulation from the date of purchase (invoice or
delivery date). The TPMS EuroShop will keep track of the activation date and keeps
the right to analyse the returned part, since improper handling will not be covered
by this warranty.